~1 metre of minimum viewing distance per 1mm of pitch (or ~3 feet per 1mm). A 12-foot primary seat typically suits 0.9–1.2mm. We always design for the controlling seat — usually the front row.
Seams are an engineering specification. Cabinet flatness tolerance (±0.2mm), precise mounting plane alignment, and calibrated brightness uniformity work together. We document all three at handover.
PQ HDR supports 10,000 cd/m² — but that describes the range, not the target. We deliver SDR reference mode (~48 cd/m²) and an HDR mode with a client-selected comfort ceiling.
No — a solid LED wall is not acoustically transparent. We design L/R flanking with above- or below-screen centre, plus processing tools that anchor dialogue to the image plane.
We lock EDID profiles for every source and validate the full signal chain during commissioning. Random blanking is a symptom of skipped commissioning steps.
We produce a formal power and heat load estimate after the Cinema Fit brief and on-site survey. Your electrician and HVAC contractor receive a brief from us.
Site survey → engineering brief → mounting plane prep → cabinet installation → commissioning and calibration. We set a schedule at contract and deliver against it.
Mid-five figures to mid-to-high six figures for fully installed systems. Hardware-only figures omit mounting, processing, HVAC, commissioning, and service. We scope accurately after the Cinema Fit brief.
Remote monitoring, periodic on-site health checks, spare panel stock, firmware updates, and prioritised on-site support. Service plans designed to match 100,000-hour panel life.