Four displays showing the same thing, driven from one source, without the usual resolution standoff. This splitter distributes a single 8K60 feed to four HDMI outputs at the full 48Gbps — and because each output downscales independently, a 4K display and an 8K display hanging off the same box both get a picture they can actually lock onto. That is the failure mode that kills most cheap splitters, and it is handled here in hardware.

There are two inputs on the front end as well as the four outputs, so it doubles as a 2×1 switch: run a player and a laptop into it and pick which one lights up the whole set. HDCP 2.3, 4:4:4 colour, and LPCM 7.1, Dolby TrueHD and DTS-HD Master Audio pass through intact.

The audio breakout takes the soundtrack off the video path so it can reach an amplifier or DSP directly, and built-in equalization, scaling and re-timing rebuild every output rather than simply fanning the input out four ways. EDID management stops the classic problem where one stubborn display drags the whole chain down to its own capabilities.

Feeding an LED video wall?

This unit is the front end of a much bigger picture. Every LED wall we ship needs a clean, stable source path in front of the receiving cards — and the cost of the electronics is a rounding error next to the screen itself. If you are specifying signal gear because a wall is coming, talk to us before you buy the boxes: we will size the whole chain and quote the display with it. See our fixed-installation LED video walls and rental LED panels.